solid cbn pcbn inserts used for hard steel machining
pcbn inserts in solid cbn and tipped cbn for hard turning
PCBN inserts for turning cast iron and hardened steel: pcbn is the second hardest material in the world, and cbn related high precision cutting tools are introduced to industry, achieved high productivity and cost reductions. pcbn is the short name of polycrystalline cubic boron nitride, and pcbn inserts are mainly for the hard metal turning to replace the conventional machining way of grinding.
solid cbn inserts for cast iron and hardened steel turning
Cubic boron nitride (cbn) inserts are used for iron-based alloys (e.g., cast irons, hard steels, iron-based composites). cbn is thermally durable up to around 1200 ºC (2192 ºF) and has high a strong defiance to chemical attack as well. Therefore, you face no problems when machining hard ferrous metals and performance is substantially better
Solid CBN Inserts for hard turning| 20 years - CBN | PCBN
CBN Inserts have much higher crack resistance with high-speed cutting. we buy those CBN plates from Element Six, and GE, then using a laser machine and Wire cut Electrical Discharge Machining to cut it in pieces for tipped on carbide.
CBN solid inserts - More Super Hard Products Co., Ltd.
Solid cbn inserts are used for rough and finish machining of hard steel ,cast iron and hard surface workpiece. Cubic boron nitride inserts (CBN Inserts) is a high-performance type of cutting tool material from a polycrystalline mass. CBN is a high hardness, high heat resistance crystal synthesized by boron and nitrogen under high temperature
solid CBN inserts, RNMN,SNMN,TNGN,CNMN,RCMN,RCMX - More
Applications of solid CBN inserts. Processing workpiece: rough and finish machining of the hard steel ,cast iron and hard surface workpiece. Processing materials: ferrous materials possessing hardness from approximately 45 HRC as well as gray cast iron, Cr-chilled cast iron and wear alloys on a cobalt, nickel or iron basis.
CBN inserts,PCBN inserts,Solid CBN inserts,CBN cutting
Halnn superhard material Co.,Ltd. is a cutting tools manufacturer with more than 20 years experience,specialized in produce Solid CBN inserts and CBN turning inserts which used for hard turning the gear,bearing,steel iron rolls,brake disc and other hardened steel and cast iron workpiece.
Solid CBN inserts, CBN inserts, PCD inserts, PCBN cutting
CBN Tools for Turning Hardened Steel. Halnn Superhard provides hard turning, hard milling, profiling, grooving, threading and other CBN tools for the hardened steel field, and has formed a set of hard cutting tools from continuous to intermittent, from roughing to super-finishing The scheme is for users to choose.
Solid CBN inserts for High manganese steel machining
Solid CBN inserts for High manganese steel machining~ Size:SNUN150716S05025 Working Condition:HPHT Cutting Depth:4mm unilateral Speed(RMP):90m/min Feed: F=0.
CBN Tipped Insert Speed and Feed Chart
SCT CBN inserts are excellent for continuous cutting of a wide range of hardened steels, powdered metals, cast irons and super alloys. The inserts are precision ground with hones for machining to sub-micron finishes with maximum tool life. CBN tipped inserts can take the place of grinding.
Solutions for Difficult Machining
Seco’s milling inserts are available for a number of face and square-shoulder milling cutters specifically designed for PCBN. These negative cutters use solid PCBN inserts ranging from 2 ½ to 8″ (63.5–203 mm) in diam. Square and round inserts are used for face milling and triangular inserts for square shoulder applications.