high quality industrial cbn inserts for rolling mortar wall (snmn150716)
Cubic Boron Nitride Inserts CBN is an artificially synthesized material exceeded in hardness only by diamond, while still offering superior wear resistance to Carbide in certain applications. North American Carbide offers over 20 grades of CBN, allowing us to find the perfect choice based on your application.
Mining Machinery-Rolling Mortar Wall
PCBN Insert. Substantially improve cutting efficiency and tool life. Download the PDF. Rolling mortar wall. Workpiece material: High manganese steel. Workpiece hardness: HB240. Machining position: Inner conical surface. Machining type: CBN/DIA superabrasive
Solid CBN insert, full CBN, hard turning,high-speed machining
ToolingBox offers different CBN materials to machining different workpiece materials with different hardness. All inserts are ISO standard, also we can produce special insert according to customer's requirement.
BN-K1 Solid CBN Insert for rough machining Mortar wall
The mortar wall belongs to the high manganese steel material, the work hardening serious, the manufacturer use carbide cutting tools before, but it will be easily wear because of the low hardness of the carbide insert itself. CBN Inserts are currently most hard materials for machining ferrous metal materials.
solid cbn inserts for cast iron and hardened steel turning
Cubic boron nitride (cbn) inserts are used for iron-based alloys (e.g., cast irons, hard steels, iron-based composites). cbn is thermally durable up to around 1200 ºC (2192 ºF) and has high a strong defiance to chemical attack as well. Therefore, you face no problems when machining hard ferrous metals and performance is substantially better
COATED CBN GRADE WITH CHIP BREAKER For Turning Carburized
Ideal for high hardness or carburized steel. COATED CBN GRADE WITH CHIP BREAKER For Turning Carburized and Hardened Steel. Ingersoll is pleased to announce the addition of a new series of coated, CBN-tipped inserts for turning carburized and hardened steel in continuous to lightly . interrupted cuts.
Turning inserts and grades for hardened steel
Achieve high productivity and outstanding quality with our Hard Part Turning (HPT) solutions for all of your component design or surface finish requirements. Find out more CBN insert with integral chip breaker. Increase productivity with a single cut strategy for hard-to-soft rough machining of automotive components such as gears, crown wheels
The some of produce facilities as below,
Workpiece: Rolling Mortar Wall Material: High manganese steel Hardness: HB240 Grade: MTN-20, MTN-60 CBN inserts: SNMN150716 Cutting parameter: Vc=60-100m/min ap=5mm f = 0.5mm/r Insert Comparison Cutting speed VC (m/min) Life (pcs/edge) Other CBN inserts 40-60 1.5 Mintek CBN inserts 60-100 2 Rough machining Rolling Mortar Wall Mintek CBN inserts
Hard part turning with CBN
CB7925 contains 75% CBN in a ceramic binder. It has a bimodal CBN grain size distribution with a mix of large and fine CBN grains (4 & 12 µm). The main application area is high alloy cast irons but this grade will also perform well in turning of hardened steel and cast iron rolls. CB7925 CBN inserts are only available in solid format. CB7925