diamond cutting tools inserts cbn pcbn insert for cast iron

diamond tipped tools - cbn | pcbn | cvd | diamond inserts

Diamond Tipped Tools - CBN | PCBN | CVD | Diamond Inserts

Polycrystalline Cubic Boron Nitride (CBN) Inserts Cutting Tools are used for hard machining applications. you can use PCBN tools if the material of your application is Alloy Steel,Tool Steel,Bearing Steel,Carbon Steel,Gray Cast Iron,Nodular Iron,White/Chilled Iron,Powdered Metal,Sintered Tungsten Carbide.

cbn inserts | solid cbn inserts for hard turning

CBN Inserts | Solid CBN Inserts for hard turning

The solid CBN means that the CBN is produced by sintering micron CBN powder and bond material, but not carbide substrate. it’s also called CBN insert full form. Slugger solid CBN inserts offer significant competitive advantages over conventional brazed tip inserts: Lower cost per cutting edge, up to two cutting edges for free per insert

full face cbn/ pcbn inserts for  - diamond cutting tools

Full Face CBN/ PCBN Inserts for - Diamond Cutting Tools

The PCBN insert is used to process hardened steel, hardened cast iron, grey cast iron and iron series metal work pieces. Highlights: With the advantages of high abrasive resistance, high processing precision, good thermal conductivity and long service life, the PCBN insert meets the international standard of ISO.

pcbn soldering inserts series- henan wanke diamond tools

PCBN Soldering Inserts Series- Henan Wanke Diamond Tools

With high thermal stability, CBN inserts can resist the high temperature of 1300℃. At the same time, it can also maintain its cutting-edge performance. This is the reason that CBN inserts can provide a long time stable tool life and high machining efficiency.

pcbn solid inserts series- henan wanke diamond tools co.,ltd

PCBN Solid Inserts Series- Henan Wanke Diamond Tools Co.,Ltd

Name (grade) of PCBN . CBN content . Hardness (HV or HK), GPa . Application . S1 . 90.00% . 4100-4300. With certain impact resistance and high wear resistance, it is suitable for continuous rough and semi- finish casting high speed steel, alloy cast iron and hardened steel machining whose hardness are above HRC55.

pcbn inserts for turning cast iron and hardened steel

PCBN inserts for turning cast iron and hardened steel

PCBN inserts for turning cast iron and hardened steel: pcbn is the second hardest material in the world, and cbn related high precision cutting tools are introduced to industry, achieved high productivity and cost reductions. pcbn is the short name of polycrystalline cubic boron nitride, and pcbn inserts are mainly for the hard metal turning to replace the conventional machining way of grinding.

pcd and cbn inserts for cutting tools that multiply

PCD and CBN Inserts for Cutting Tools that Multiply

PCD Tools and CBN inserts, diamond tools and natural diamond tools, single stone dressers, radius dressers. We also resharpen and retip tools.

solid cbn inserts for cast iron and hardened steel turning

solid cbn inserts for cast iron and hardened steel turning

swift manufacturing ltd offer high speed cutting tools and methods, we supply with solid cbn inserts,polycrystalline cbn inserts for turning cast iron and hardened steel. cbn has advantages for cutting ferrous metal such as roller,bearing,automobile brake disk,hydraulic pumps,aircraft jet engines etc.

cbn tipped insert speed and feed chart

CBN Tipped Insert Speed and Feed Chart

SCT CBN inserts are excellent for continuous cutting of a wide range of hardened steels, powdered metals, cast irons and super alloys. The inserts are precision ground with hones for machining to sub-micron finishes with maximum tool life. CBN tipped inserts can take the place of grinding.

machining cast iron with cbn inserts - cutting tools

Machining Cast Iron With CBN Inserts - Cutting Tools

CBN can provide a cost effective and highly productive alternative to hard metal or ceramic cutting tools for the machining of cast irons. In general terms, the following factors should be considered when applying CBN to an iron component:Cast iron is not generally very hard (less than HRc.30) but tends to be abrasive. CBN is…