cnmn120704 patented product cbn cutting insert super hard industrial inserts for wind power bearings
Relapping Inserts: This is the simplest and least expensive way of reworking your CBN tooling inserts. The wear on your insert is measured and we simply grind back your cutting edge to clean up the wear. Edge preps if any are reapplied and you get back a good as new cutting tool at the fraction of the price of a new one.
Super Finishing CBN Insert | CBN Cutting Tools | FUNIK
As a professional CBN super hard cutting tool manufacturer, we take advantage of our technology to produce high-performing CBN abrasives in a number of different types. Then, depending on different high temperature and high pressure micro-crystalline patented technologies, we have produced a variety of CBN cutting tools, and have built a
Hard Part Turning with CBN Inserts
Component: Wind Power Bearings 42CrMo, HRC58~62, Semi-Interrupt turning Selected Insert:BN-H10 RNGN090300 Cutting Condition: ap=1mm(Roughing),ap=0.15mm(Finishing) Fr=0.45mm/r,Vc=145m/min, dry cutting Insert Materials Cutting Speed Tool Life Efficiency Halnn BN-H10 145m/min 3pcs/blade Improve 20% Other Brand 120m/min 2pcs/blade ---- Processing
PCBN (Polycrystalline Cubic Boron Nitride) Insert &PCD (Polycrystalline Diamond) Inserts SUNBETTER CBN SUPERHARD CUTTING TOOLS NOMINATION STANDARD Corner radius Ar sharp or round insert 0.2 0.4 0.8 1.2 1.6 2.0 2.4
Hard Steel Cutting Tools| PCBN Cutting Tool | REALY
If you use normal cutting tools, you will find that blade cracking and wear are common problems. BNS301 and BNW30 and other PCBN inserts made by REALY feature a low PCBN content and a fine grain size. The PCBN content in these cutting inserts is about 50-74%, making them ideal for customers that need to cut hard steel.
MAPAL Super hard cutting materials en
Super hard cutting materials | PcBN indexable inserts Efficient, economical, effective From MAPAL’s many years of experience in hard turning, and as a result of ongoing development and optimisation of the product programme, an extremely large number of insert geometries and different cutting materials have been produced
CBN & PCD Inserts | Goodson Tools & Supplies
2X6144 : 1/2" x 3/16" Single Sided CBN Cutter With Screwhole $204.99 2379268 : 1/2" x 3/16" Single Edge Prep, Diesel Only CBN Cutter Out of stock CBNS-38 : 3/8" x 1/8" Uncoated CBN Cutter Insert $144.99 CBNS-12 : 1/2" x 3/16" Single Sided Uncoated CBN Cutter Insert $174.99 DRD-500 : Diesel Super Abrasive $354.99 CBN-500SHIM : 1/16" Thick
CBN Tipped Insert Speed and Feed Chart – Scientific
SCT CBN inserts are excellent for continuous cutting of a wide range of hardened steels, powdered metals, cast irons and super alloys. The inserts are precision ground with hones for machining to sub-micron finishes with maximum tool life. CBN tipped inserts can take the place of grinding.
CBN & PCD Inserts | MITSUBISHI MATERIALS CORPORATION
What is “My list“? “My list” is a function that keeps a list of the pages in this site that you view often. My list can be viewed by clicking the “To view my list” button.
Hard part turning with CBN
A CBN insert can withstand the high cutting temperatures and forces and still retain its cutting edge. This is why CBN delivers long, consistent tool life and produces components with excellent surface finish. Sandvik Coromant offers a comprehensive program of unique CBN products for finish turning of case hardened steels.
CBN Inserts | Solid CBN Inserts for hard turning
The solid CBN means that the CBN is produced by sintering micron CBN powder and bond material, but not carbide substrate. it’s also called CBN insert full form. Slugger solid CBN inserts offer significant competitive advantages over conventional brazed tip inserts: Lower cost per cutting edge, up to two cutting edges for free per insert