180mm fast cutting speed diamond grit jigsaw blade with arbor adapter
Diamond-Grit Circular Saw Blades | McMaster-Carr
A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the
Diamond-Grit Jigsaw Blades | McMaster-Carr
The edge of the blade is coated with diamond grit, which lasts longer than carbide grit when cutting through abrasive materials such as cement, brick, and tile. Choose medium grit for less material loss and a smooth cut; choose coarse grit for fast cutting.
Diamond-Grit Saw Blades | McMaster-Carr
The diamond grit bonded to the edge of these steel blades lasts up to 30 times longer and cuts twice as fast as carbide grit. Long-Life T-Shank Jigsaw Blades for Ceramics and Masonry
flush cut diamond blade
MK Diamond 158821 MK-304FC Standard Flush Cutting Blade 4-Inch diameter by .080-Inch wide by 7/8-Inch by 5/8-Inch Arbor 5.0 out of 5 stars 3 $73.56 $ 73 . 56 ($4.60/oz)
6 Pack 4" T-Shank Diamond Coated Jig Saw Blades Grit 80
6 Pack, 4 inch Long KENT T180DG Diamond Coated T-Shank Jig Saw Blade for Ceramic, Tile, Fiberglass, Grit 80. T-Shank Diamond Jig Saw Blade. 4” T-Shank Diamond Coated Jig Saw Blade, Grit 80. Diamond Grit 80, Working Length 3”, Width 5/16” Narrow Kerf Allows for Clean, Thin, Faster Fine Straight or Curved Cuts
Unbranded Diamond Jig Saw Blade-FT8015 - The Home Depot
The Diamond Grit Jig Saw Blade is perfect for any tile job. Made to cut through porcelain, ceramic, and glass tile, this jig saw blade can tackle any tiling job. Multi-Fit Shank allows for use with all jig saws.
6 Pack 3" T-Shank Kent Diamond Coated Jig Saw Blades Grit
6 Pack, 3" KENT T150DG, Diamond Coated T-Shank Jig Saw Blade for Ceramic, Tile, Fiberglass, Grit 50. T-Shank Diamond Jig Saw Blade. 3” T-Shank Diamond Coated Jig Saw Blade, Grit 50. Diamond Grit 50, Working Length 2”, Width 5/16” Narrow Kerf Allows for Clean, Thin, Faster Fine Straight or Curved Cuts
Jig Saw Blades | CRAFTSMAN
Shop the newest CRAFTSMAN Jig Saw Blades on the Official Site of CRAFTSMAN. Now available at a retailer near you.
Diamond Jigsaw Blades Granite Quartz Tile | ATS Diamond Tools
Blade 2 = (Gold) 30/40 Vacuum brazed diamond jigsaw blade , similar to Blade 1 but with a higher volume of diamond, a little longer last and slightly more aggressive. Blade 3 = 4 segment sintered diamond jigsaw blade designed for thicker materials such as 20 to 30mm thick worktops with a more traditional sintered segment more suited to Quartz
Bosch 3-1/4 in. Diamond Grit T-Shank Jig Saw Blade
Use this Diamond-Grit Jigsaw Blade from Bosch to make clean, smooth cuts in slate, limestone, marble, backerboard, glass, Grade 5 porcelain and granite, among other masonry materials. Operating the saw at a moderate speed and keeping the 3-1/4 in. blade cool with water, it is capable of producing straight and rounded edges in a variety of